The ABZ Innovation C10 is a professional cleaning drone designed for high-pressure washing of façades, roofs, gutters, solar panels and hard-to-reach industrial surfaces. The complete 60 m set includes the drone, high-pressure cleaning system, four batteries, propeller guards, tank, pump and control components required to prepare the system for operation.
The ABZ Innovation C10 was designed for professional cleaning operations in industrial and commercial environments. Its high-pressure cleaning system enables work to be performed at height without requiring personnel to access the cleaned surface directly.
The pressure lance mounted on the drone directs the liquid stream onto the surface being cleaned. The high-pressure hose is connected to a ground-based system, so the drone does not need to carry the entire water supply.
The set includes two 30 m high-pressure hose sections, providing a total length of 60 m. The high-pressure rotary coupling helps reduce hose twisting and supports unrestricted manoeuvring during cleaning operations.
Two 30 m high-pressure hose sections allow cleaning work to be performed at significant heights without purchasing an additional hose extension.
The drone cleaning system supports a maximum pressure of up to 200 bar. The actual operating pressure and flow rate depend on the connected pressure washer.
The integrated radar supports obstacle detection when operating near façades, roofs, technical structures and other objects.
The drone can reduce the need to perform selected cleaning tasks from scaffolding, aerial work platforms or cranes.
Four batteries support more efficient organisation of consecutive flight and charging cycles during field operations.
The set includes the components required to prepare a professional high-pressure cleaning system for work at heights of up to 60 m.
All components included in the offered set are listed below.
The ABZ Innovation C10 can be used for professional cleaning of hard-to-reach surfaces on industrial, commercial and residential buildings.
Cleaning elevated gutters without the need to install extensive scaffolding.
Cleaning photovoltaic systems installed on roofs and other hard-to-reach structures.
High-pressure washing of façades, industrial surfaces and structural elements located at height.
Technical parameters of the drone and its onboard cleaning system according to the manufacturer's datasheet.
| Parameter | EU value |
|---|---|
| General specifications | |
| Payload | High-pressure cleaning system |
| Maximum take-off weight | 24.9 kg |
| Total weight with battery | 17.3 kg |
| Total weight without battery | 13 kg |
| Maximum characteristic dimension | 2290 mm |
| Dimensions with arms and propellers unfolded, including spray lance | 2060 × 1600 × 600 mm |
| Dimensions with arms and propellers folded, including spray lance | 1170 × 540 × 600 mm |
| Dimensions with arms and propellers folded, without spray lance | 770 × 540 × 600 mm |
| Maximum flight time | 18 minutes |
| Navigation and positioning | |
| Satellite systems | GPS, GLONASS, Galileo, BeiDou |
| RTK correction | Network RTK; optional Emlid RS RTK base station |
| Hovering precision | ±10 cm with RTK / ±1.5 m without RTK |
| Heading | Dual-RTK |
| Propulsion and power system | |
| Rotor dimensions | 30 × 11 |
| Battery type | Li-Po Smart |
| Battery capacity | 16,000 mAh |
| Nominal battery voltage | 44.4 V |
| Battery weight | 4.2 kg |
| Minimum battery charging time | 11 minutes |
| Battery charger channels | 4 ports, including 2 balance ports |
| Battery charger power | 3000 W |
| Camera and control | |
| Camera | Wide-angle, vertically adjustable from 0 to 180° |
| Camera resolution | FHD |
| Effective remote controller signal range | approximately 3.5 km |
| Water and dust resistance | Limited water and dust resistance |
| Onboard cleaning system | |
| Maximum cleaning system pressure | 200 bar |
| Spray lance | Removable for transport |
| Spray lance extension range | ±180 mm |
| Spray nozzle angle | 25° |
| Spray nozzle holder compatibility | M18 × 1.5 |
| Nozzle holder | Fixed or tiltable |
| Supported hose length | 30 m or 60 m |
| Frequency bands | |
| Radio control and telemetry | 2.4 GHz |
| WLAN | 2.4 GHz |
| LoRa | 862–1020 MHz |
| Flight parameters | |
| Maximum pitch angle | 17° |
| Maximum horizontal speed | 3 m/s |
| Maximum flight altitude AMSL | 4500 m |
| Maximum flight altitude AGL | 120 m |
| Maximum tolerable wind speed | 10 m/s |
* Weight parameters may vary by ±1 kg depending on the final product configuration.
** The maximum characteristic dimension is the maximum distance between the tips of two opposite propellers.
The actual operating pressure and liquid flow rate depend on the specifications of the pressure washer connected to the system.
