The ultimate drone thermal imaging solution is here.
The new FLIR Duo Pro R combines a high resolution, radiometric thermal imager, 4K color camera and full suite of on-board sensors to bring you the most powerful
dual-sensor imaging solution in the world for small commercial drones. Capture actionable data around the clock with Duo Pro R.
Top of the line drone imaging
With two live video output options - analog video or digital video over micro HDMI - pilots can switch between thermal and color imagers in flight or view them both in
picture-in-picture mode and select MSX® blended imagery, all while recording video and stills on two microSD cards.
Built-in sensor suite for image geo-tagging
It's on-board sensor suite makes Duo Pro R a self-contained airborne mapping package. Fully integrated GPS receiver, IMU, magnetometer and barometer provide all
the data needed to create accurate orthomosaics from an aiborne platform without integrating to external flight controllers.
Easy to configure & integrate
Easy configuration over Bluetooth with the FLIR UAS app for iOS and Android lets pilots easily configure Duo Pro R before takeoff. Set color palettes, image optimization
features, configure PWM inputs and MAVLink interface and start recording all without lugging a computer to the field.
FLIR Vue Pro R Specifications:
|Overview||Vue Pro R 640||Vue Pro R 336|
|Thermal Imager||Uncooled VOx Microbolometer|
|Resolution||640 × 512||336 × 256|
(FOV for Full-Sensor Digital Output)
|9 mm; 69° × 56°
13 mm; 45° × 37°
19 mm; 32° × 26°
|6.8 mm; 45° × 35°
9 mm; 35° × 27°
13 mm; 25° × 19°
(FOV for NTSC Analog Output)
|9 mm; 62° × 49°
13 mm; 45° × 35°
19 mm; 32° × 24°
|6.8 mm; 44° × 33°
9 mm; 34° × 26°
13 mm; 24° × 18°
|Spectral Band||7.5 - 13.5 μm|
|Full Frame Rates||30 Hz (NTSC); 25 Hz (PAL)|
|Exportable Frame Rates||7.5 Hz (NTSC); 8.3 Hz (PAL)|
|Measurement Accuracy||+/-5°C or 5% of reading in -25°C to +135°C range
+/-20°C or 20% of reading in -40°C to +550°C range
|Size||2.48" × 1.75" x 1.75" (including lens)|
|Precision Mounting Holes||Two M2x0.4 on each of two sides & bottom
One 1/4-20 threaded hole on top